Xadow Duino (Compatible)

CreateLabz StoreSKU: 11-002


Shipping calculated at checkout

Only 1 unit left


The Xadow Duino is compatible with the Xadow Duino board. It is specially designed for building up awesome Lighting Devices using the most popular RGB LED WS2812b. Based on the MCU ATmega32u4 and the built-in micro USB, Xadow Duino allows you to either control the RGB LEDs directly from the software in RePhone Kit Create or program the board with Arduino IDE to make it work dependently. Unlike any other add-on modules, this Xadow Duino board also has its own battery socket (JST1.0 type).

You can power it in many ways:

  • Via 5V USB (if the battery is connected, it would also charge the battery simultaneously )
  • Via 3.7V Lipo battery
  • Via breakout pins
  • Via Xadow GSM+BLE


  • Able to work as an Arduino
  • Plug-and-play if connected with RePhone Kit Create
  • Open source and modular design
  • Slim and small
  • Specially designed for WS2812B
  • Built-in 11PIN Xadow Connectors for full flexible connection with other Xadow Modules
  • Stackable, chainable, and sewable with other Xadow Modules
  • Perfect choice for LED lovers


  • Microcontroller: ATmega32u4
  • Power Supply:

-5V via USB, current draw is 1.5A at Max

-3.3 – 4.2V via battery socket, current draw is 1.5A at Max

-3.3 – 6V via breakout pins, current draw is 500 mA at Max

-3.3 – 4.2 V via Xadow GSM+BLE, current draw is

-500 mA at Max

  • Charging Current: 500mA
  • Flash Memory: 32 KB (ATmega32u4) of which 4 KB used by bootloader
  • SRAM: 2.5KB (ATmega32u4)
  • EEPROM: 1 KB (ATmega32u4)
  • Clock Speed: 16MHz
  • Connector: 2 x 11 PIN Xadow Connector; Bonding pads for RGB LED WS2812b
  • Interfaces: Interface with Xadow GSM+BLE through; I2C (7-bit address 0x23)
  • Dimension: 25.37mm X 20.30mm / 1’’ X 0.8’’

Package Includes:

  • 1x Xadow Duino
  • 2x FPC Cable 11 PIN 
  • 1x LED strip 
  • 3x 6mm Connecting wires

Customers who bought this item also viewed

You recently viewed this item