Description
Seeed Studio XIAO ESP32C3 has equipped a highly-integrated ESP32-C3 chip, built around a 32-bit RISC-V chip processor with a four-stage pipeline that operates at up to 160MHz. Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. The board equips highly-integrated ESP32-C3 SoC. The chip has been installed with a complete 2.4GHz Wi-Fi subsystem which means it supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode for multiple Wi-Fi applications. It works under an ultra-low power state, also supporting features of Bluetooth 5 and Bluetooth mesh. This board comes included with an external antenna to increase the signal strength for wireless applications. There are 11 digital I/O that can be used as PWM pins and 4 analog i/o that can be used as ADC pins. It supports UART, IIC, and SPI serial communication ports. There are 400 KB SRAM & 4 MB Flash on the chip, allowing for more programming space, and bringing more possibilities to the IoT control scenarios.
Feature:
· Flexible MCU Board: Incorporate the ESP32-C3 32-bit RISC-V chip, operating up to 160 MHz, mounted multiple development ports, supported by Arduino / CircuitPython
· Outstanding RF performance: Implement complete Wi-Fi functions and Bluetooth Low Energy, while supporting communication over 100m with a U.FL antenna
· Elaborate Power Design: Provide 4 working modes as low as 44 μA in deep sleep mode, while supporting lithium battery charge management
· Thumb-sized Design: 21 x 17.5mm, Seeed Studio XIAO series classic form factor, suitable for wearable devices
· Perfect for Production: Breadboard-friendly & SMD design, no components on the back
Specifications:
Processor:
· ESP32-C3 SoC
· RISC-V single-core 32-bit chip processor with a four-stage pipeline that operates at up to 160 MHz
Wireless:
· Complete 2.4GHz Wi-Fi subsystem
· Bluetooth 5.0/ Bluetooth mesh
On-chip Memory: 400KB SRAM & 4MB Flash
Interface:
· 1x UART, 1x IIC, 1x SPI,11x GPIO(PWM), 4x ADC
· 1x Reset button, 1x Boot button
Dimensions: 21 x 17.5mm
Power:
· Circuit operating voltage: 3.3V@200mA
· Charging current: 50mA/100mA
· Input voltage (VIN): 5V
Deep Sleep Power Consumption: Deep Sleep Model: >44 μA
Wi-Fi Enabled Power Consumption:
· Active Model: <75 mA
· Modem-sleep Model: <25 mA
· Light-sleep Model: <4 mA
BLE Enabled Power Consumption:
· Modem-sleep Model: <27 mA
· Light-sleep Model: <10 mA
Working Temperature: -40°C~85°C
Applications:
· Internet of Things
· Wearable devices
· Health monitoring
· Education
· Low-Power(LP) networking
· Rapid prototyping
Package Included:
1 x Seeed Studio XIAO ESP32C3 with Antenna (pins not included)
Note: Product Images are shown for illustrative purposes only and may differ from the actual products.