RS485 to TTL Serial Port UART Level Converter Module

CreateLabz StoreSKU: 60-038

Price:
₱75

Shipping calculated at checkout

Stock:
In stock (16 units), ready to be shipped

Description

This is a module that allows the TTL interface of the microcontroller to be transferred to the RS485 module. It is generally used for industrial automation. This module adds lightning protection design and anti-jamming design. When we use it in the field and carry out long distance transmission, we can Connect the GND end of the module to the ground so that lightning protection and anti-interference can be achieved.
It uses a standard 2.54 mm pitch design. If you want to make the second development will be more convenient. It has 120 ohm matching resistance, shorted R0 can, it is recommended that users in the long distance transmission shorted.
It supports communication between multiple microcontrollers, allowing up to 128 devices on the bus. It can be hot-swappable, in order to prevent signal interference, it carried out a large area of copper, the effect is very good.

Features:

·         3.3V perfectly compatible with 5.0V power supply

·         3.3V and 5.0V signal perfectly compatible

·         Working temperature range: -40 to + 85

·         Transmission distance up to kilometers (with 850 meters of 2 * 1.5 cable to do the test, it is recommended to use in the 800 meters, more than 800 meters, please add repeaters)

·         Semi-hole process design, the thickness of 0.8mm, makes it easy to use as a combo board, it can also be welded terminal use

·         Has RXD, TXD signal lights to observe send and receive status

·         Communication methodHalf duplex

·         The module is fully considered mine design, long-distance transmission signal 485 in the wild, the module “Connected  to the Ground” terminal is effect, more secure; it can  not connect with the ground when the indoor short-distance transmission.

·         Using the standard 2.54 pitch design, easy secondary development.

·         Has a 120ohm termination resistors, shorted R0 to enable the termination resistor.

·         Support multi-machine communication, allowing access at up to 128 devices on the bus

·         The module can be hot swapped, the signal does not appear dead phenomenon

·         A large area of copper to prevent interference.

Package Included:
1x RS485 to TTL Serial Port UART Level Converter Module
Note:
Product Images are shown for illustrative purposes only and may differ from the actual products.

Customers who bought this item also viewed

You recently viewed this item