Arduino Upgraded Starter Kit

 This Arduino Upgraded Starter Kit is designed for beginner to intermediate-level users of Arduino. You can learn from basic to advanced microcontroller programming and RFID basics. It includes lots of sensors and other components. Great for project starters, hobbyists and researchers.

Package Included:

KIT 1

• 1 X UNO Board
• 1 X USB Cable
• 30 X Jumper Cable wires
• 1 X Breadboard
• 30 X LED Light
• 40 X Resistor
• 20 X Female to male Dupont line
• 1 X Potentiometer 10k
• 2 X Buzzer
• 1 X RTC Module
• 1 X 74HC595
• 1 X Infrared receiver
• 1 X LM35
• 1 X Flame Sensor
• 2 X Ball Switch
• 3 X Photoresistor
• 5 X Push button with cap
• 1 X Remote control
• 1 X 4-digit display tube
• 1 X 8*8 Dot led matrix 
• 1 X 1-digit display tube
• 1 X Stepper driver motor 
• 1 X Stepper motor
• 1 X SG90 Servo
• 1 X 1602 LCD with I2C
• 1 X XY joystick module
• 1 X DHT11 module
• 1 X Water level sensor
• 1 X RFID Module
• 1 X RFID keychain
• 1 X RFID White card
• 1 X Sound Module
• 1 X 1-ch. Relay Module
• 1 X 4*4 Keypad
• 1 X RGB 3 color module
• 1 X 9V Battery Snap
• 1 X Male Header pin
• 4 X Jumper cap

KIT 2

• 1 x Official UNO R3 Arduino Development Board
• 1 x Prototype Shield For UNO
• 1 x Mini Breadboard
• 1 x Large 830 Breadboard
• 1 x IR Remote Control
• 1 x Male Header 2.54mm 40pin
• 1 x Male Header 90deg 2.54mm 40pin
• 1 x 1602 LCD Display
• 1 x Stepper Motor Driver
• 1 x 5V Stepper Motor
• 1 x 4*4 Keypad
• 5 x Resistors 1K Ohm
• 20 x Resistors 220R Ohm
• 20 x Resistors 10K Ohm
• 1 x RGB Module
• 1 x Joystick Module
• 1 x Battery Box 9V (6x AA)
• 1 x HC-SR04 Ultrasonic Sensor
• 1 x DC Motor
• 1 x Relay Module
• 2 x Seven Segment Display 1-Digit
• 1 x Seven Segment Display 4-Digit
• 1 x 74HC595 Shift Register IC
• 1 x Matrix 8 x 8 Display
• 10 x Dupont Wires F-F
• 1 x USB Cable
• 30 x Jumper Wires M-M
• 1 x Water Level Sensor
• 1 x RFID Kit (Module + Card + Tag)
• 1 x MAX7219 Seven Segment Display Driver
• 1 x SG90 Servo Motor
• 5 x RGB LEDs
• 1 x Infrared Receiver 940
• 10 x Green LEDs
• 10 x Yellow LEDs
• 10 x Red LEDs
• 1 x Flame Sensor
• 1 x IR Receiver (For Remote Control)
• 1 x SW-520 Tilt Sensor Switch
• 1 x CDS Photo-resistor (Light Sensor)
• 1 x LM35 Temperature Sensor
• 1 x Mercury Switch
• 10 x Key Switches 12*12mm
• 5 x Key Switches 6*6mm
• 1 x Active Buzzer
• 1 x Passive Buzzer
• 1 x 10K Potentiometer
• 1 x 5K Potentiometer
  
  

Download the CH340G Driver for Arduino Uno.

Note: Product Images are shown for illustrative purposes only and may differ from the actual product.