Description
The Arduino Pro Mini 328 Mini ATMEGA328P is compatible with the Arduino Pro Mini board. The Arduino Pro Mini is a microcontroller board based on the ATmega328. It has 20 digital input/output pin (six of them can be used as a PWM output, 8 analog input, a 16MHZ/8MHZ resonator, a reset button, the installation header pin.
This module has been previously flashed with the blink sketch and tested. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. This is a professional version of the Mini Pro, is a microcontroller circuit board. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. A great way to learn how to solder too!
Features/Specifications:
- Pro mini ATMEGA328P running at 16MHz with external resonator (5V/16MHZ, 3.3V/8MHZ)
- Operating Voltage(logic level): 5V And Max 150mA output.
- Support USB download and Power.
- USB connection off-board.
- Supports auto-reset.
- Over-current protected And Reverse polarity protected.
Technical Parameters:
Pro Mini 328 Mini ATMEGA328P 5V/16MHz for Arduino
- Reverse polarity protected
- 5V regulator
- DC input: 5V up to 12V
- 14 digital IO: TXD, RDX, D2-D13
- 8 analog IO: A0-A7
- Using Atmel Atmega328P-AU microcontroller
- Dimension: 33.3 *18.0mm
- EEPROM: 1KB
- SRAM: 2KB
- Flash Memory: 32KB
- Note: Unsoldered Pins
Pro Mini 328 Mini ATMEGA328P 3.3V/8MHz for Arduino
- 14 digital input/output port RX and TX, D2 ~ D13
- 8 analog input port A0 ~ A7
- 1 to the TTL level a serial port to send and receive port RX/TX
- 6 PWM port, D3, D5, D6, D9, D10, D11
- Using Atmel Atmega328P-AU microcontroller
- Max 150mA output
- Support external 3.3V ~ 12V dc power supply
- Support the Li-ion polymer batteries while direct connect Vcc Pin
- Size: 33.3 * 18 (mm)
- Note: Unsoldered Pins
Packing List:
- 1pc x Arduino Pro Mini 328 (Compatible) Mini ATMEGA328P
Note: Product Images are shown for illustrative purposes only and may differ from the actual products.