Boost DC-DC Adjustable Converter XL6009 5-32Vin to 4.5-35Vout 20W

CreateLabz StoreSKU: 81-018

Price:
₱330

Shipping calculated at checkout

Stock:
Only 2 units left

Description

 

1: The new original XLSEMI chip, eliminate fake, disassemble chip.
2: Imported SMD electrolytic capacitors, not accompanied by homemade capacitance.
3: Up to 400Khz operating frequency, and LC filter circuit, the output ripple is very low.
4: Import TDK inductors, the heat, and noise to a minimum.
5: Input and output three MLCC Multilayer ceramic capacitors, interference enhance stability.
6: PCB use kb of A-grade sheet material, to prevent cardboard, garbage plate.
7: Built-in MOSFET, the LM2577 built-triode say goodbye, can reach 94% efficiency.
8: Increased enable the port, you can control the boost circuit.
9: Dimensions: 49 (L) * 23.4 (W) * 11.4 (H) mm (excluding potentiometer)

 

Specification:

    • Module Properties: non-isolated step-up module (BOOST)
    • Model: XL6009
    • Material: Circuit Board, Electronic Components
    • Input voltage: 5-32V 
    • Output voltage:  (4.5-35V)

    • Output Current: 1.5A (MAX)
    • Input Current: 4A (MAX)
    • Output power: natural cooling 20W, plus heat sink 25W (MAX) real power
    • Maximum output power = input voltage conversion efficiency * 4A *conversion efficiency
    • Conversion efficiency: the efficiency of the measured voltage and current commonly used (hereinafter, for reference only)  
 A=Input voltage. B=Input Current. C=Output voltage. D=Output Current. E=conversion efficiency

    •  Operating temperature: Industrial grade (-40 C to + 85 C) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat dissipation)
    • Full load temperature rise: 45 C
    • Operating frequency: 400khz
    • Load current: 5V turn 12V 15mA, 8.4V turn 12V 7mA, 12V switch 24V 9mA, 12V switch 36V 18mA, 24V switch 48V 9mA, 24V switch 36V 6mA.
    • Load regulation: ± 0.5%
    • Voltage regulation: ± 0.5%
    • Dynamic response speed: 5% 200uS
    • Enable Control Port: Yes, high 1.4V-VIN (ON), low 0-0.8V (OFF), the default high
    • Short circuit protection: None (Please install fuse or protection circuit input)
    • Input reverse polarity protection: None, please with our reverse protection diode board or in the input series.
    • Installation: You can screw (Fixing holes 3 mm), 2 fixing holes
    • Color: Red

  • Package Includes:

    1x Boost DC-DC Adjustable Converter Module XL6009

  •  Note: Product Images are shown for illustrative purposes only and may differ from the actual products.

Customers who bought this item also viewed

You recently viewed this item