This micro hydro generator mechanically converts water flow into electrical energy with a 0-12 Volt DC output. The output voltage is 12 VDC with a voltage regulator. Can drive approximately 10W of LED-s between 3-12 V, or be used for battery charging with a maximum current of 220mA. Start generating electricity with this highly efficient Hydroelectric Generator. When you are ready gradually turn on your water supply, this will remove any air locks.
- High UV and water resistance for a long life
- Highly efficient
- Low flow loss
- Smooth start
- F50-12V： DC 12V regulated output, it can supply 12V radio, LED light.
- Maximum Voltage: 12VDC (1.2Mpa)
- Maximum Current: ≥220mA (12V)
- Dimensions: about 87*31mm/3.43*1.22in
- Water inlet/outlet size: 1/2"
- Output voltage: 12V
- Pressure required for max. voltage w/outlet closed : 0.6Mpa
- Pressure required for max. voltage w/outlet open: 1.2Mpa
- Operating water pressure: 0.05 - 1.2MP
- Water Temperature Range: 0 - 80 degrees
- Each device is fully inspected and tested
- Fitted with 6-inch insulated leads.
- Size: 8.8x5.8x3.9cm(L X W X H)