Description
This MPU9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis accelerometer. The other die houses the AK8963 3-Axis magnetometer from Asahi Kasei Microdevices Corporation. Hence, the MPU-9250 is a 9-axis motion tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). The MPU-9250 also features an embedded temperature sensor.
This module includes pull-up resistors on the SDA, SCL, and NCS lines, pull-down resistors on the FSYNC and AD0 lines, and an onboard 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator (refer to schematic link below).
- On-board pull-up resistors on SDA, SCL, and nCS
- On-board pull-down resistors on FSYNC and AD0
-
3-Axis Accelerometer
Range: up to ± 16 g
Sensitivity: up to 16,384 LSB/g -
3-Axis Gyroscope
Range: up to ± 2000 deg/sec
Sensitivity: up to 131 LSB/deg/sec -
3-Axis Magnetometer
Range: ± 4800 µT
Sensitivity: 0.6 µT/LSB - Interface: I2C
- I2C Address: 0x68 by default, 0x69 if AD0 is pulled high
- Board Dimensions: 25.5mm (1.004″) long x 15.4mm (0.606″) wide, 3mm (0.118″) inside diameter of mounting holes
- Module Model: GY-9250
- Use Chip: MPU-9250
- Power supply :3-5v (internal low dropout regulator)
- Communication: Standard IIC/SPI communication protocol (Chip 16bit AD converter, the output data 16 )
- Gyro range: ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
-
Using Immersion Gold PCB, machine welding process to ensure quality
2.54mm pin pitch -
Module size 16mm * 26mm
- Weight:2.5g
Package Includes:
1x MPU-9250 9DOF 9-axis Inertial MPU sensor with pin header
Note: Product Images are shown for illustrative purposes only and may differ from the actual products.