Solenoid Valve Plastic, 1/2" 12V DC/ 220V AC Water Valve

DC12V 1/2 Pressure Normally Open/Closed Plastic Solenoid Valve the valve works with the solenoid coil which operates electronically with DC 12 volt supply. DC12V Pressure Normally Open/ Closed Plastic Solenoid Valve that you can use to control the flow of a liquid using your computer or microcontroller.
Solenoid valves differ in the characteristics of the electric current they use, the strength of the magnetic field they generate, the mechanism they use to regulate the fluid, and the type and characteristics of fluid they control. The mechanism varies from linear action, plunger-type actuators to pivoted-armature and rocker actuators. Solenoid valves are the most frequently used control elements in fluids. Their tasks are to shut off, release, dose, distribute or mix fluids. Solenoids offer fast and safe switching, high reliability, long service life, good medium compatibility of the materials used, low control power and compact design.
Note:  While Connecting Valve in Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the valve)

Specification:

Pressure Normally Closed

·         Name:1/2” DC 12V /220V AC Solenoid Valve

·         Material: PP plastic

·         Voltage: DC 12V

·         Current: 1A

·         Operation model: Indirect acting normally closed (N/C)

·         Pressure: about 0.02 – 0.8Mpa(Pressure)

·         Port size: about G1/2”

·         Fluid temperature: about 0-90℃

·         Size: Total length: 72mm

·         Total width: 36mm

·         Total height: 57mm

·         Thread: G1/2 “male thread

·         Thread length: 17mm

·         Fixed pitch: 25 * 25mm

Pressure Normally Open

·         Name:1/2” DC 12V Solenoid Valve

·         Material: PBT

·         Voltage: DC12V

·         Rated power: approx. 5W

·         Operating Model: Normally Open (N/O)

·         Pressure: approx. 0.02 - 0.8 MPA.

·         Port size: over G1 / 2 inches.

·         Fluid temperature: approx. 0-100 degrees Celsius.

·         Use: water and low viscosity fluids

·         Flow marking:

·         About 0.02MPA > 2L/min;

·         About 0.10 mpa > 10 l/min;

·         About 0.30 mpa > 16 l/min;

·         Approx. 0.80 mpa > 28 l/min.

Package Included:
1x Solenoid Valve Plastic, 1/2"  12V DC/ 220V AC Water Valve
Note: Product Images are shown for illustrative purposes only and may differ from the actual products.