SIM800C GSM/GPRS Module, with antenna & on-board regulator

CreateLabz StoreSKU: 60-010

Style: SIM800C V2.0
Price:
₱855

Shipping calculated at checkout

Stock:
Sold out

Description


Introduction
1. Supports Bluetooth / TTS / DTMF function;
2. Reserve IPEX interface, SMA interface, spring antenna interface, it can be used for different occasions, different antennas;
3. Send reference program(please contact the servicer).

Product Features

1. Input voltage range 5V-20V DC, power supply range for a variety of power supply applications, it makes students and projects more convenient to use, GPRS module communicates in peak current, low voltage, so the higher the development board supply voltage, The smaller current makes the power supply pressure smaller, the integrated GPRS module to the product, the need to consider the development board of the power circuit, as far as possible making the width of more than 1mm power line, the shorter the better;
2. module connected to the power automatically after connected to the network, do not need to control the boot button, power directly to start, eliminating the need for trouble starting process, reserved boot pin, you can control the user switch;
3. TTL module with a level conversion circuit, compatible with a variety of single-chip serial port. Do not need to convert the direct connection;
4. Audio interface, pin-oriented way to facilitate the test, reverse headphones and microphone interface;
5. Bluetooth, Bluetooth 3.0 protocol, enhanced Bluetooth antenna signal super, support for serial SPP and audio services;
6. Reserve lithium battery-powered BAT interface, you can use the lithium battery-powered to facilitate the project development, 3.7V lithium battery or 18650 lithium battery;
7. Reserve IPEX interface, SMA interface, spring antenna interface, can be used for different occasions, different antennas.


Product Pin Description:

    • GND: Power ground
    • VCC_IN: power supply pin, input DC5V-20V, used to supply power to the board
    • RI: The kernel ringing pin
    • DTR: Data terminal preparation
    • TXD: module serial send pin, TTL level (not directly connected to the RS232 level)
    • RXD: module serial receive pin, TTL level (not directly connected to the RS232 level)
    • U2_R: module serial port 2 receive pin
    • U2_T: Module serial port 2 transmit pin
    • This pin is used to convert the TXD and RXD of the GSM module board to the TTL logic of the corresponding target board. This is used to convert the TXD and RXD of the GSM module board to the corresponding TTL logic
    • ADC: ADC detection
    • SPP: Core audio output pin
    • SPN: Core audio output pin
    • MC-: Core audio input pin
    • MC +: Core audio input pin
    • PWR: Pull down this pin to enable the module to be turned on or off
    • BAT: lithium battery input pin, 3.3v-4.4v

Customers who bought this item also viewed

You recently viewed this item